PH6-04 Male Banjo Elbow - 6mm Tube OD x BSPT 1/2

PH6-04 Male Banjo Elbow - 6mm Tube OD x BSPT 1/2

Connect one compatible pneumatic tube at 90 degrees to a matching female equipment port. The PH banjo-style elbow uses a metal threaded bolt with a hex head and one blue tube release collar. Match the tube outside diameter and the actual thread.

Included in one sales unit

1 complete assembled PH male banjo elbow. The threaded bolt and tube release collar remain assembled. Tubing, equipment, tools, spare parts and storage boxes are not included.

Original supplier PH series photographs and real alternate views. Appearance and proportions vary with selected size; photographs are series references. Selected tube OD and nominal thread are listed below.

Model & Reference Codes

Tube size is outside diameter at the push-in connection. Nominal pipe-thread size is not a measured mounting-hole diameter. Match the actual female equipment port before installation.

Position, connect and inspect.

Isolate and fully depressurize. Match tube OD and the female equipment-port thread. Tighten the threaded bolt at its metal hex using a sealing method suitable for the connection. Set the outlet orientation before pressurizing; do not use the plastic body or blue collar as a wrench. Cut compatible tubing square, remove debris and insert the tube fully. Pull gently to check retention. Restore air gradually and leak-check the tube joint and threaded joint. To remove the tube, fully depressurize, press the collar and withdraw the tube.

Pack quantities

Choose 1 / 5 / 20 identical complete fittings per pack. Quantity counts packs. Displayed pack prices include the shown savings.